"BELT DRIVES LTD."

Drag Specialties Rear Drive Belt 131 Tooth 1" Wide Carbon fiber reinforced Goodyear engineered Falcon SPC™ belts offer up to 33% more tensile strength than conventional aramid reinforced belts...

REPLACEMENT COMPONENTS C-clip for back side of clutch hub

REPLACEMENT COMPONENTS

PRIMARY DRIVE Kits include primary chain, front sprocket and nut, chain adjuster, clutch basket and clutch assembly with Kevlar® plates Feature new-style clutch that eliminates grabbing and dragging...

PRIMARY DRIVE Kits include primary chain, front sprocket and nut, chain adjuster, clutch basket and clutch assembly with Kevlar® plates Feature new-style clutch that eliminates grabbing and dragging...

CLUTCH BASKET Precision machined out of aluminum and then hard anodized

CLUTCH BASKET Precision machined out of aluminum and then hard anodized

CLUTCH BASKETS Precision machined out of aluminum and then hard anodized

CLUTCH BASKETS Precision machined out of aluminum and then hard anodized

CLUTCH HUB PTFE LINING Comes with rivets

CLUTCH HUB Precision machined out of aluminum and then hard anodized For all drives 1990-up (splined)

CLUTCH HUB Precision machined out of aluminum and then hard anodized

CLUTCH HUB TAPERED For all drives 1970-84 (early taper)

CLUTCH SPRINGS 1,365” clutch springs for Top Fuel/Quiet Drive clutch belt drives 6 pack For use on BDL Belt Drive clutches

DOUBLE ROW HUB BEARING 40 mm double-row hub bearing For use on BDL Belt Drive clutches

IDLER ASSEMBLY REPLACEMENT Idler assembly replacement for 1-1/2'' M11 kits

CLUTCH PLATE Kevlar® clutch plate two-sided, inner splined For use on BDL Belt Drive clutches

KEVLAR CLUTCH PLATES Kevlar clutch plates for Part No 11300101 Set of 7

BELT DRIVE KIT Kits include front and rear pulley, 3-3/8” belt, nine Kevlar® friction plates and 11 steel clutch plates; use up to nine springs for varying pressure to accommodate any motor size...

OFFSET FRONT PULLEYS 47 tooth, 76mm width, 8mm pitch front pulley for primary transmition Used to offset motor pulley for belt alignment Spacer inserts are available in eight widths from 1/4” to...

OFFSET FRONT PULLEYS 48 tooth, 76mm width, 8mm pitch front pulley for primary transmition Used to offset motor pulley for belt alignment Spacer inserts are available in eight widths from 1/4” to...

DOMED PULLEY COVER Includes clutch basket cover, motor pulley cover, special tape and button-head bolts with template for permanent installation For 47-tooth motor shaft pulley and 76-tooth clutch...

DOMED PULLEY COVER Includes clutch basket cover, motor pulley cover, special tape and button-head bolts with template for permanent installation For 47-tooth motor shaft pulley and 72-tooth clutch...

PRESSURE PLATE For use on BDL Belt Drive clutches

PRIMARY DRIVE KIT Primary drive kit with front 31 tooth pulley, rear 47 tooth basket, 92 tooth 38mm 11M drive belt, nuts and washers This drive incorporates your stock hub and clutch pack right into...

PRIMARY DRIVE KIT Primary drive kit with front 39 tooth pulley, rear 62 tooth basket, 132 tooth 38mm 8M drive belt, nuts and washers This drive incorporates your stock hub and clutch pack right into...

PRIMARY DRIVE KIT Primary drive kit with front 47 tooth pulley, rear 76 tooth basket, 144 tooth 51mm 8M drive belt, nuts and washers This drive incorporates your stock hub and clutch pack right into...

PRIMARY DRIVE KIT Primary drive kit with front 41 tooth pulley, rear 61 tooth basket, 132 tooth 38mm 8M drive belt, nuts and washers This drive incorporates your stock hub and clutch pack right into...

PRIMARY DRIVE KIT Primary drive kit with front 31 tooth pulley, rear 47 tooth basket, 132 tooth 38mm 11M drive belt, nuts and washers This drive incorporates your stock hub and clutch pack right into...

PRIMARY DRIVE KIT Primary drive kit with front 31 tooth pulley, rear 47 tooth basket, 99 tooth 38mm 11M drive belt, nuts and washers This drive incorporates your stock hub and clutch pack right into...

PRIMARY DRIVE KIT Primary drive kit with front 41 tooth pulley, rear 61 tooth basket, 132 tooth 38mm 8M drive belt, nuts and washers This drive incorporates your stock hub and clutch pack right into...

PRIMARY DRIVE KIT Primary drive kit with front 39 tooth pulley, rear 62 tooth basket, 132 tooth 38mm 8M drive belt, nuts and washers This drive incorporates your stock hub and clutch pack right into...

PRIMARY DRIVE KIT Primary drive kit with front 40 tooth pulley, rear 62 tooth basket, 132 tooth 38mm 8M drive belt, nuts and washers This drive incorporates your stock hub and clutch pack right into...

PRIMARY DRIVE KIT Primary drive kit with front 31 tooth pulley, rear 47 tooth basket, 99 tooth 38mm 11M drive belt, nuts and washers This drive incorporates your stock hub and clutch pack right into...

PRIMARY DRIVE KIT Primary drive kit with front 41 tooth pulley, rear 61 tooth basket, 132 tooth 38mm 8M drive belt, nuts and washers This drive incorporates your stock hub and clutch pack right into...

PRIMARY FRONT PULLEY 45 tooth 41mm width, 8mm pitch front pulley for primary transmition Precision machined out of aluminum and then hard anodized Motor shaft pulleys come with nut and washer...

PRIMARY FRONT PULLEY 45 tooth 38mm width, 8mm pitch front pulley for primary transmition Precision machined out of aluminum and then hard anodized Motor shaft pulleys come with nut and washer...

PRIMARY FRONT PULLEY 47 tooth, 76mm width, 8mm pitch front pulley for primary transmition Precision machined out of aluminum and then hard anodized

PRIMARY FRONT PULLEY 48 tooth, 76mm width, 8mm pitch front pulley for primary transmition Precision machined out of aluminum and then hard anodized

REAR PULLEY CNC billet aluminum construction Teeth are gear-cut to RMA standards for a perfect belt fit Available in 65- or 70-tooth styles

REAR PULLEY CNC billet aluminum construction Teeth are gear-cut to RMA standards for a perfect belt fit Available in 65- or 70-tooth styles

REAR PULLEY CNC billet aluminum construction Teeth are gear-cut to RMA standards for a perfect belt fit Available in 65- or 70-tooth styles

REAR PULLEY CNC billet aluminum construction Teeth are gear-cut to RMA standards for a perfect belt fit Available in 65- or 70-tooth styles

REPLACEMENT BELT

REPLACEMENT BELT

REPLACEMENT BELT

REPLACEMENT BELT

REPLACEMENT BELT

REPLACEMENT BELT

REPLACEMENT BELT

REPLACEMENT BELT

REPLACEMENT BELT

REPLACEMENT BELT

REPLACEMENT BELT

REPLACEMENT BELT

REPLACEMENT BELT

REPLACEMENT BELT

REPLACEMENT BELT

REPLACEMENT BELT Precision machined out of aluminum and then hard anodized For use on BDL Belt Drive clutches

REPLACEMENT BELT

REPLACEMENT BELT

REPLACEMENT BELT

REPLACEMENT REAR BELT

REPLACEMENT REAR BELT

REPLACEMENT REAR BELT

REPLACEMENT REAR BELT

REPLACEMENT REAR BELT

REPLACEMENT REAR BELT

REPLACEMENT REAR BELT

REPLACEMENT REAR BELT

REPLACEMENT REAR BELT

REPLACEMENT REAR BELT

REPLACEMENT REAR BELT

REPLACEMENT REAR BELT

REPLACEMENT REAR BELT

REPLACEMENT REAR BELT

REPLACEMENT REAR BELT

REPLACEMENT REAR BELT

REPLACEMENT REAR BELT

REPLACEMENT REAR BELT

ROUND CLUTCH DOGS For Evolution 5-speed models 12-pack

ROUND DOGS 4 SPEED For use on BDL Belt Drive clutches

SHOULDER BOLTS Set of 6 For use on BDL Belt Drive clutches

SHOULDER BOLTS Set of 9 For use on BDL Belt Drive clutches

SPACER INSERTS Offset spacer insert 1''

SPACER INSERTS Offset spacer insert 1-1/4'' Used to offset motor pulley for belt alignment Pulleys are for 3” systems and accept any of the spacer inserts listed Pulleys and spacer inserts sold...

SPACER INSERTS Offset spacer insert 1/2'' Used to offset motor pulley for belt alignment Pulleys are for 3” systems and accept any of the spacer inserts listed Pulleys and spacer inserts sold...

SPACER INSERTS Offset spacer insert 1/4'' Used to offset motor pulley for belt alignment Pulleys are for 3” systems and accept any of the spacer inserts listed Pulleys and spacer inserts sold...

SPACER INSERTS Offset spacer insert 3/4'' Used to offset motor pulley for belt alignment Pulleys are for 3” systems and accept any of the spacer inserts listed Pulleys and spacer inserts sold...

STARTER RING GEAR

STARTER RING GEAR

STARTER RING GEAR

STEEL DRIVE PLATE SPLINED Steel backing plate inner splined For use on BDL Belt Drive clutches

PULLEY LOCK PLATE KIT Comes with locking plate mounting screws

TRANSMISSION PULLEY Made from 6061-T6 aluminum, then hard anodized for durability One-third the weight of stock pulleys All 84-06 Big Twin pulleys come with a spacer for use on 85-93 models When using...

TRANSMISSION PULLEY Made from 6061-T6 aluminum, then hard anodized for durability One-third the weight of stock pulleys All 84-06 Big Twin pulleys come with a spacer for use on 85-93 models When using...

TRANSMISSION PULLEYS Made from 356-T6 aluminum, then hard anodized for long life One-third the weight of stock pulleys All 85-99 Big Twin pulleys come with a spacer for use on 85-93 models When using...

TRANSMISSION PULLEY Made from 6061-T6 aluminum, then hard anodized for durability One-third the weight of stock pulleys All 84-06 Big Twin pulleys come with a spacer for use on 85-93 models When using...

TRANSMISSION PULLEYS Made from 356-T6 aluminum, then hard anodized for long life One-third the weight of stock pulleys All 85-99 Big Twin pulleys come with a spacer for use on 85-93 models When using...

TRANSMISSION PULLEYS Made from 356-T6 aluminum, then hard anodized for long life One-third the weight of stock pulleys All 85-99 Big Twin pulleys come with a spacer for use on 85-93 models When using...

TRANSMISSION PULLEYS Made from 356-T6 aluminum, then hard anodized for long life One-third the weight of stock pulleys All 85-99 Big Twin pulleys come with a spacer for use on 85-93 models When using...

TRANSMISSION PULLEYS Made from 356-T6 aluminum, then hard anodized for long life One-third the weight of stock pulleys All 85-99 Big Twin pulleys come with a spacer for use on 85-93 models When using...